Oh, Lucky Me ~ Mystical Illusionz

This tutorial was written on March 15th, 2010 Donna Vinson AKA Sapphire.Love. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of Adobe Photoshop.



SUPPLIES:

Scrap kit - Oh, Lucky Me - By Mystical Illiusionz


Open your new document, 500 x 500.

Open MIZ_OML_circlecloverframe & re-size by 70%, paste into your new document, add your drop shadow > opacity 30% > distance 3 > size 1.

Use your tube of choice.

Open MIZ_OLM_paper6, re-size by 60%, paste into your document behind your tube & frame, and erase what is sticking outside of the frame.

Open MIZ_OLM_rainbow1, re-size by 80%, paste into your document behind your frame & tube, add your drop shadow > opacity 20% > distance 3 > size 1.

Use mask of choice.

Open MIZ_OLM_hatwballonn, re-size by 30%, paste into your document, add your drop shadow > opacity 30% > distance 3> size 1.
Right click > duplicate layer > okay.
Control + T, right click > flip horizontal, then move over to the other side.

Add your text, I've used gradient glow around the text, but that is a matter of choice. add your drop shadow > opacity 30% > distance 3 > size 1.

Add your copyright information & you're done!!

Hope you enjoyed my tut

Que Sera Sera ~ Kris

This tutorial was written on March 10th, 2010 Donna Vinson AKA Sapphire.Love. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of Adobe Photoshop.


ARTIST: ©Marco Guaglione
You MUST purchase a license to use his artwork at MPT
Supplies: Que Sera Sera - By Mystical Illiusionz


Open your new document, 500 x 500.

Open miz - qss - scallopedroseframe2, re-size by 80%, paste into your new document. Add your drop shadow > opacity 30% > distance 3 > size 1.

Open your tube - resize it by 70%,erase it until it looks like her underside is tucked into the frame. Add your drop shadow > opacity 30% > distance 3 > size 1.

Open miz - qss - paper22, re-size by 50%, paste into your document, under your tube & frame, erase the paper from under the roses so all you see is the white background.

Use Mask of Choice.

Open miz - qss - rose3 and Open miz - qss - rose4, and alternate between resizing both of them from 30% and 25%, and just paste them onto your document in the order I did, or in your own way.

Open miz - qss - rose3, re-size to 20%, paste into your document, add your drop shadow incase you are using a white background, the roses actually show up (lol), I've got mine somewhere between 20% opacity & 22%, duplicate the layer of the rose, and paste it where you want to.

miz - qss - glitterheart2 and miz - qss - glitterheart3, re-size by 40%, paste into your document under your frame, and rotate a little, add your drop shadow to both > opacity 20% > distance 3 > size 1.

Open miz - qss - glitterheart1, re-size by 30%, paste into your document under your frame like the previous hearts, add your drop shadow > opacity 20% > distance 3 > size 1.

Then duplicate the heart layers and move them to both sides (right & left), and the bottom.

Use your ellipitcal tool, add your text, I've used Eye Candy: Gradient Glow, Colors are #6a1216 & #ffffff
Afterwards - add your name, copyright info & I hope you liked my tut! :D

Punk Never Looked So Good Tutorial

This tutorial was written on November 11th, 2009 by Donna Mae AKA Sapphire Love. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of Adobe Photoshop.



Supplies Needed:
Mask Of Choice
Tube of Choice - I've used "Kate" by Elias Chatzoudis you MUST purchase a license to use his work at MPT
Scrap kit - Pretty & Punk(click to purchase), By Tammy's Scraps
Word Art


Open your new document, 500 x 500.

Open Pretty & Punk _ Frame 2, re-size by 23%.
Go to Image > Adjustments > Hue/Saturation > Edit: Master > Set your Hue to -47.

Open your tube, re-size by 85%, paste into your document, on top of your frame layer. Add your drop shadow > opacity 30% > distance 3 > size 1.

Use your magic wand and select inside your frame, press shift + control + n and a new layer should pop up, move that layer under your frame & your tube. Use your paint bucket tool and fill in the frame with the color black. Then go to Filter > Texturizer > Texture: Sandstone > Scaling 73% > Relief 4.

Use your mask of choice. The colour I used for my mask is #c993a1.

Open up your tube again, re-size her by 130%, paste into your document, behind your frame, set her opacity to 50%, and erase everything but her head.

Open Pretty & Punk _ Bow 5, re-size by 10%, paste into your document add your drop shadow > opacity 20% > distance 3 > size 1.

Open the word art that was provided - Re-size by 65%, paste into your document.

Add your name - Copyright information & you're done! Hope you enjoyed my tutorial!

Girly Girl Tutorial

This tutorial was written on November 6thth, 2009 by Donna Mae AKA Sapphire Love. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of Adobe Photoshop.

Supplies Needed:
Mask of Choice
Tube by Keith Garvy you MUST purchase a license to use his artwork at MPT
Scrap Kit Pinktastic by Manda's Dazzling Designs


Open your new document, 500 x 500.

Open PinktasticFrame2, re-size by 50%, paste into your document, add your drop shadow > opacity 30% > distance 3 > size 1.

Use your mask of choice.

Use your rectangular marquee tool and select inside your frame, press shift + control + n and a new layer should pop up, place it under your frame layer, use your paint bucket tool and click inside, use the color white, Go to Edit > Texturizer> Texture > Canvas > Scaling 50% > Relief 4.

Open your tube, re-size by 88%, paste into your document, add your drop shadow > opacity 30% > distance 3 > size 1.
Go back to your tube, undo your re-sizing, and re-size it by 130%, paste into your document, behind your frame, flip her, and set the opacity to 70%, add your drop shadow > opacity 20% > distance 3 > size 1.

Open PinktasticPendant3, re-size by 15, paste into your document, add your drop shadow > opacity 20% > distance 3 > size 1. Erase some of it, so it looks like its hanging onto the frame.

Open PinktasticDifferentFlower3, re-size by 15%, paste into your document, add your drop shadow > opacity 20% > distance 3 > size 1.

Duplicate your mask twice, so you now have 3 masks. Set the first layers noise to 20, the second layer, 21, the last layer 22, then animate it.

Tag it and you're done. viola!

Looking for CU Christmas Bears?

$3.00 CU OK
Kristen has to manually process orders so please allow 12-24 hours for delivery.

The night is calling Tutorial

This tutorial was written on October 15th, 2009 by Donna Mae AKA Sapphire Love. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of Adobe Photoshop.


Supplies Needed:
All Hallows Eve by Cazie's Designs
Mask of Choice
Tube by Popeye Wong, He's a free to use artist, check him out!



Open your new document, 500 x 500.

Open Cazie_All Hallows eve_Frame02, re-size by 25%, paste into your document, add your drop shadow > opacity 30% > distance 3 > size 1.

Open Cazie_All Hallows eve_WingedSkull, re-size by 35%, paste into your document, add your drop shadow > opacity 20% > distance 3 > size 1.

Open your tube, re-size her by 75%, paste into your document, add your drop shadow > opacity 30% > distance 3 > size 1.

Re-size your tube to 500 x 721, use your rectangular marquee tool and select her "head" area, paste her into your document, behind your frame, set her opacity to 50%.

Set your foreground color to #490303, press shift + control + n and a new layer should pop up. Move that layer until it's under your frame, and your tube inside the frame. Use your Ellipitcal Marquee Tool, select inside your frame, use your paintbucket and fill in the color. Go to Filter > Texture > Grain > Intensity 17 and Contrast to 50.

Use your mask of choice in the color you choose, my color is #606060.Go Up to Filter > Noise > Amount 7 > Uniform Checked & Monochromatic Checked.


Open Cazie_All Hallows eve_Candle-1, re-size by 30%, then again by 78%. Add your drop shadow > opacity 20% > distance 3 > size 1.

Use your Ellipse Tool, create a circle around your frame, get your text tool, put it over the line until you see a ~ looking type thing, but sideways, then begin your wording.

Add your name, tag it,and viola, you are done. :D Hope you enjoyed my tutorial!

Innocent Eyes Tutorial

This tutorial was written on October 9th, 2009 by Donna Mae AKA Sapphire Love. The concept of the tag is mine and mine alone. Any resemblance to any other tag/tut is pure coincidence. This was written for those with working knowledge of Adobe Photoshop.


Supplies Needed:
Angel or Devil(Tagger Size) by Schnegge

Let's get started!

Open your new document,500 x 500.

Open Frame3_AngelOrDevil_Schnegge, re-size by 80%, place into your new document.
Blending Options > Drop Shadow > Opacity 30% > Distance 3 > Size 1.

Open Poser2_AngelOrDevil_SChnegge, re-size by 75%, paste into your document, On top of your "Frame" layer.
Go to Blending Options > Drop Shadow > Opacity 30% > Distance 3 > Size 1. Uncheck "Global Lighting" and set the angle to -34.

Open Frame4_AngelOrDevil_Schnegge, Re-size by 90%, paste behind your layers(except the white background).

Open Paper18_AngelOrDevil_Schnegge, Use your Rectangular Marquee Tool, Select a section of your paper, paste it into your document, behind your frame.

Open Flower5_AngelOrDevil_Schnegge, re-size by 25%, paste into your document, add your drop shadow > opacity 20% > distance 3 > size 1. Right click > Duplicate Layer, and move it.

Open Flower6_AngelOrDevil_Schnegge, re-size by 35%, paste into your document, between your two white flower layers, add your drop shadow > opacity 20% > distance 3 > size 1.

Open Poser4_AngelOrDevil_Schengge, Use your Rectangular Marquee Tool, and select a section of her, paste it into the document, behind your frame, set the opacity to 60%.

Add your name, Tag it, and viola! You're done. :)

Hope you enjoyed my tutorial!